# QR Code Size for Print: Minimum Sizes and the Maths

> Make a free QR code, then size it for print: quiet zone, module size, printer dots and scan distance, with rules of thumb for cards, menus and posters.

Page: https://adengage.ae/growth-gps/guides/qr-code-print-size.html
Published: 2026-11-22
Updated: 2026-11-22
Tool on this page: QR code generator (https://adengage.ae/growth-gps/qr-code-generator.html)

## QR code size for print: work it out, then test it

Make your code free below and download the SVG, then use the sizing steps so it scans from where people will actually stand.

## What size should a QR code be when printed?

Size it for the distance people scan from. A common rule of thumb is a code at least one tenth as wide as that distance: about 2 cm for a card held in the hand, about 3 cm for a table card and 10 cm or more for a poster read from a metre away. Keep a clear margin four modules wide on every side, and always scan a real size proof.

## The three things that decide the size

Modules across, the quiet zone and the scanning distance set the smallest size that works.

A QR code is a grid of small squares called modules. Three things decide how big it has to print.

**Modules across.** The smallest QR code, version 1, is 21 by 21 modules, and each version adds 4 modules per side, up to 177 by 177 at version 40. More data, a higher error correction level or a logo pushes the version up, so the same printed width holds smaller modules.

**The quiet zone.** The code needs a clear margin four modules wide on every side, where nothing is printed. It belongs to the code; it is not decoration.

**Distance.** A phone camera has to see each module clearly from where the person stands, so a code read from further away needs bigger modules.

The PNG and SVG files from the generator above already include the four module margin, so place them whole and never crop them.

## How to size a QR code for print

1. **Shorten what goes in** Use the shortest link that does the job, such as a short page on your own domain. Fewer characters means fewer modules and bigger squares at the same width.
2. **Make the code and download SVG** Make the code above and download the SVG. It scales without blurring and carries the quiet zone with it.
3. **Count the modules** Open the SVG in any text editor. Its viewBox gives the width in modules including the margin: for example 0 0 37 37 means a code 29 modules across plus 8 for the margin.
4. **Measure the scanning distance** Stand where the customer will stand: holding a card, seated at a table, walking past a window. Measure that distance.
5. **Apply the rule of thumb** Divide the distance by ten for the code width as a starting point. A table card read from about 30 cm suggests about 3 cm; a window read from 1.5 metres suggests about 15 cm.
6. **Check the printer can hold it** Divide the printed width by the module count from the viewBox to get each module's size. Denso Wave recommends at least four printer dots per module for stable printing.
7. **Print a proof and test** Print one copy at real size on the real material, and scan it from the real distance with an iPhone and an Android phone, in the real light.

## Rules of thumb by placement

Starting widths from the one tenth ratio, before you test.

| Placement | Assumed scan distance | Starting width | Watch out for |
|---|---|---|---|
| Business card | Held in the hand, about 20 cm | About 2 cm | Gloss and foil finishes |
| Table card or menu | Seated, about 30 cm | About 3 cm | Curved stands and laminate glare |
| Flyer or brochure | Held, about 30 cm | About 3 cm | Placing the code across a fold |
| Shelf talker or counter card | About 50 cm | About 5 cm | Shelf edge lighting and shadows |
| Shop window or poster | 1 to 1.5 metres | 10 to 15 cm | Reflections on the glass |
| Exhibition stand panel | About 2 metres | About 20 cm | Visitors standing in front of it |
| Billboard or road sign | Read at speed | Usually not worth it | Print a short web address instead |

These are rules of thumb, not guarantees. Dense codes, small modules and poor light need more room, so test every proof.

## Worked examples with the numbers

### A table card in a cafe

Suppose your menu link makes a code 25 modules across, so 33 with the margin. Printed 3 cm wide, each module is 30 mm divided by 33, about 0.9 mm. On a 300 dpi printer one dot is 25.4 divided by 300, about 0.085 mm, so each module gets around ten dots, well above the four dot guidance. At 30 cm the one tenth rule is met.

### The same card with a logo and a long tracked link

Suppose you add a logo and a long link with five UTM tags, and the code grows to 45 modules across, so 53 with the margin. At the same 3 cm, each module drops to about 0.57 mm. It still prints, but each square is smaller to a camera at 30 cm. Shorten the link or print at 4 cm, then test both.

### A shelf sticker from a label printer

Suppose a shop prints shelf codes on a 203 dpi thermal label printer. One dot is 25.4 divided by 203, about 0.125 mm, so four dots make 0.5 mm per module. A code 29 modules across plus 8 for the margin needs at least 37 times 0.5 mm, about 1.9 cm, before you think about scan distance.

## Print checklist

- [ ] A dark code on a light background, never reversed
- [ ] The quiet zone, four modules wide, is clear on all four sides
- [ ] Nothing overlaps the code: no text, frame, photo or fold
- [ ] Printed on a flat surface where possible, not wrapped round a bottle or a curved stand
- [ ] A matt patch under the code when the rest of the piece is gloss or foil
- [ ] A short line next to the code says what it opens
- [ ] The link shown under the code in the generator is the one you meant
- [ ] A real size proof has been scanned from the real distance by two phones

## Who sizes QR codes for print

- **Event organisers** Badges, stand panels and stage screens each have their own scan distance, so each gets its own width from the same link.
- **Marketers** A campaign that runs on flyers, posters and packaging keeps one source SVG and sizes it for each placement.
- **Business owners** A shop or clinic owner scans the window poster from the pavement before paying for the full run.
- **Designers and printers** A designer checks the module size before sending artwork, so the printer never receives a code it cannot reproduce.
- **Packaging teams** Pack designers check the module size against the label printer's resolution as well as the distance a shopper holds the pack.

## What changes in 2027 for sizing QR codes

### Now

- Denso Wave's print guidance stands: a quiet zone four modules wide on every side, larger modules for more stable reading, and at least four printer dots per module.
- When a code will not fit its space, Denso Wave lists three ways out: a lower version, a smaller module or splitting the code. For marketing print, a shorter link is the practical route to a lower version.

### Next

- Packaging is moving to QR codes that carry GS1 product data, with the aim that shop tills worldwide scan them by the end of 2027, so pack designers will size codes for a till scanner and a phone at once.
- AdEngage UAE expects more QR codes in 2027 on screens as well as paper, where brightness and screen size replace print resolution; test those the same way, at the real distance.

## Sources

- [Denso Wave: Point for determining the code area](https://www.qrcode.com/en/howto/code.html)
- [Denso Wave: Point for setting the module size](https://www.qrcode.com/en/howto/cell.html)
- [Denso Wave: Information capacity and versions of QR Code](https://www.qrcode.com/en/about/version.html)
- [GS1: Industry support for the transition to QR codes with GS1 standards](https://gs1.org/sites/gs1/files/2024-06/global-industry-endorsement-statement-qr-codes-with-gs1-standards.pdf)

## Questions people ask

### What is the minimum size for a QR code?

There is no single minimum: it depends on the modules, the printer and the scan distance. As a rule of thumb, about 2 cm wide for a card held in the hand, with the margin clear, and always a tested proof.

### How big should a QR code be on a poster?

Divide the scanning distance by ten as a starting point, so a poster read from 1.5 metres needs a code about 15 cm wide. Test a proof from where people will stand.

### What is the quiet zone on a QR code?

The clear margin around the code, four modules wide on every side, where nothing is printed. Scanners need it to find the code, and the files from the generator include it.

### Does a logo make the QR code bigger?

It can. With a logo the generator uses its highest error correction level, which holds less data in each version, so the code may need more modules. Print it a little larger and test.

### Should I send PNG or SVG to the printer?

SVG. It is a vector file that stays sharp at any size. Keep PNG for screens, slides and social posts.

### Why does my printed QR code not scan?

Common causes are a code too small for the distance, a cropped margin, a light code on a dark background, glare, a fold or curve through the code, or a link that has changed. Fix the cause and print a new proof.

### Can I print a QR code in my brand colours?

Yes, if the code stays dark on a light background with strong contrast. The generator flags any colour pair that phone cameras may struggle to tell apart.

### How small can a QR code be on a product label?

Work it out from your printer: at least four dots per module, multiplied by the modules across including the margin. Then check that a phone reads it at arm's length.

### How do I find how many modules my code has?

Open the downloaded SVG in a text editor and read the viewBox. The number includes the margin, so subtract 8 for the modules of the code itself.

By the AdEngage UAE growth team. Reviewed by Pancham SN Bannerrjee, Founder and CEO. Published 22 November 2026. Last updated 22 November 2026.

6th Floor, Meydan Grandstand, Meydan Road, Nad Al Sheba 1, Dubai. uae@adengage.ae. WhatsApp +971 54 566 6253.
