What size should a QR code be when printed?
Size it for the distance people scan from. A common rule of thumb is a code at least one tenth as wide as that distance: about 2 cm for a card held in the hand, about 3 cm for a table card and 10 cm or more for a poster read from a metre away. Keep a clear margin four modules wide on every side, and always scan a real size proof.
The three things that decide the size
Modules across, the quiet zone and the scanning distance set the smallest size that works.
A QR code is a grid of small squares called modules. Three things decide how big it has to print.
Modules across. The smallest QR code, version 1, is 21 by 21 modules, and each version adds 4 modules per side, up to 177 by 177 at version 40. More data, a higher error correction level or a logo pushes the version up, so the same printed width holds smaller modules.
The quiet zone. The code needs a clear margin four modules wide on every side, where nothing is printed. It belongs to the code; it is not decoration.
Distance. A phone camera has to see each module clearly from where the person stands, so a code read from further away needs bigger modules.
The PNG and SVG files from the generator above already include the four module margin, so place them whole and never crop them.
How to size a QR code for print
Shorten what goes in
Use the shortest link that does the job, such as a short page on your own domain. Fewer characters means fewer modules and bigger squares at the same width.
Make the code and download SVG
Make the code above and download the SVG. It scales without blurring and carries the quiet zone with it.
Count the modules
Open the SVG in any text editor. Its viewBox gives the width in modules including the margin: for example 0 0 37 37 means a code 29 modules across plus 8 for the margin.
Measure the scanning distance
Stand where the customer will stand: holding a card, seated at a table, walking past a window. Measure that distance.
Apply the rule of thumb
Divide the distance by ten for the code width as a starting point. A table card read from about 30 cm suggests about 3 cm; a window read from 1.5 metres suggests about 15 cm.
Check the printer can hold it
Divide the printed width by the module count from the viewBox to get each module's size. Denso Wave recommends at least four printer dots per module for stable printing.
Print a proof and test
Print one copy at real size on the real material, and scan it from the real distance with an iPhone and an Android phone, in the real light.
Rules of thumb by placement
Starting widths from the one tenth ratio, before you test.
| Placement | Assumed scan distance | Starting width | Watch out for |
|---|---|---|---|
| Business card | Held in the hand, about 20 cm | About 2 cm | Gloss and foil finishes |
| Table card or menu | Seated, about 30 cm | About 3 cm | Curved stands and laminate glare |
| Flyer or brochure | Held, about 30 cm | About 3 cm | Placing the code across a fold |
| Shelf talker or counter card | About 50 cm | About 5 cm | Shelf edge lighting and shadows |
| Shop window or poster | 1 to 1.5 metres | 10 to 15 cm | Reflections on the glass |
| Exhibition stand panel | About 2 metres | About 20 cm | Visitors standing in front of it |
| Billboard or road sign | Read at speed | Usually not worth it | Print a short web address instead |
These are rules of thumb, not guarantees. Dense codes, small modules and poor light need more room, so test every proof.
Worked examples with the numbers
A table card in a cafe
Suppose your menu link makes a code 25 modules across, so 33 with the margin. Printed 3 cm wide, each module is 30 mm divided by 33, about 0.9 mm. On a 300 dpi printer one dot is 25.4 divided by 300, about 0.085 mm, so each module gets around ten dots, well above the four dot guidance. At 30 cm the one tenth rule is met.
The same card with a logo and a long tracked link
Suppose you add a logo and a long link with five UTM tags, and the code grows to 45 modules across, so 53 with the margin. At the same 3 cm, each module drops to about 0.57 mm. It still prints, but each square is smaller to a camera at 30 cm. Shorten the link or print at 4 cm, then test both.
A shelf sticker from a label printer
Suppose a shop prints shelf codes on a 203 dpi thermal label printer. One dot is 25.4 divided by 203, about 0.125 mm, so four dots make 0.5 mm per module. A code 29 modules across plus 8 for the margin needs at least 37 times 0.5 mm, about 1.9 cm, before you think about scan distance.
Print checklist
- A dark code on a light background, never reversed
- The quiet zone, four modules wide, is clear on all four sides
- Nothing overlaps the code: no text, frame, photo or fold
- Printed on a flat surface where possible, not wrapped round a bottle or a curved stand
- A matt patch under the code when the rest of the piece is gloss or foil
- A short line next to the code says what it opens
- The link shown under the code in the generator is the one you meant
- A real size proof has been scanned from the real distance by two phones
Who sizes QR codes for print
Event organisers
Badges, stand panels and stage screens each have their own scan distance, so each gets its own width from the same link.
Marketers
A campaign that runs on flyers, posters and packaging keeps one source SVG and sizes it for each placement.
Business owners
A shop or clinic owner scans the window poster from the pavement before paying for the full run.
Designers and printers
A designer checks the module size before sending artwork, so the printer never receives a code it cannot reproduce.
Packaging teams
Pack designers check the module size against the label printer's resolution as well as the distance a shopper holds the pack.
What changes in 2027 for sizing QR codes
Now
- Denso Wave's print guidance stands: a quiet zone four modules wide on every side, larger modules for more stable reading, and at least four printer dots per module.
- When a code will not fit its space, Denso Wave lists three ways out: a lower version, a smaller module or splitting the code. For marketing print, a shorter link is the practical route to a lower version.
Next
- Packaging is moving to QR codes that carry GS1 product data, with the aim that shop tills worldwide scan them by the end of 2027, so pack designers will size codes for a till scanner and a phone at once.
- AdEngage UAE expects more QR codes in 2027 on screens as well as paper, where brightness and screen size replace print resolution; test those the same way, at the real distance.