GuideUTM builder

UTM builder guide: tag every campaign link so GA4 reports it correctly

Build a tracked link in the free UTM builder below, then use the naming rules and examples so every campaign lands in the right GA4 channel.

Pick where the link will run, or type your own source and medium.

Run it again on the full UTM builder Every option is there, and what you typed carries over.

What is a UTM builder?

A UTM builder adds tracking tags to a link, such as utm_source=instagram, utm_medium=paid_social and utm_campaign=ramadan_offer, so Google Analytics can report where each visit came from. Google says to always set utm_source, utm_medium and utm_campaign, and parameter values are case sensitive, so agree one lower case naming scheme and use it everywhere.

How to build a UTM link in a minute

  1. Paste the landing page

    Type the page people should land on into the builder above. Use the real page, not the homepage. Other parameters already in the link are kept.

  2. Pick where the link will run

    Tap a preset such as Google Ads, Instagram, Email, WhatsApp or Print QR. It fills utm_source and utm_medium for you, and you can still type your own.

  3. Name the campaign

    Give utm_campaign a short name you will still recognise next year, such as ramadan_offer. The builder makes it lower case and turns spaces into underscores.

  4. Add term and content if you need them

    utm_term holds the keyword for a search ad. utm_content tells two ads or placements apart, such as story_video and feed_carousel.

  5. Copy the link

    Copy the tracked link into the ad, post, email or message. If source, medium or campaign is missing, the builder warns you, because GA4 reports will be incomplete.

  6. Turn it into a QR code for print

    For flyers, menus and boards, open the full QR code generator, build the link in its UTM builder and tap Make it a QR code.

  7. Keep a shared log

    Record every link in one sheet: date, channel, campaign, content and the final address. A log is what keeps a team's names consistent.

  8. Read the results in GA4

    After the first day of traffic, look at source, medium and campaign in GA4, and fix any name that has split into two.

The five UTM tags, and what each one records

TagWhat it recordsExampleWhen to use it
utm_sourceWhere the visit came fromgoogle, instagram, newsletter, printAlways
utm_mediumThe type of channel, which drives the GA4 channelcpc, paid_social, email, qrAlways
utm_campaignThe campaign nameramadan_offerAlways
utm_termThe paid keywordvilla_for_rent_dubaiSearch ads only
utm_contentWhich ad, link or placementstory_videoWhen you compare versions

Google also supports utm_id, utm_source_platform, utm_creative_format and utm_marketing_tactic, and says the last two are not currently reported in Google Analytics. Parameters you leave out show as (not set).

Where each builder preset lands in GA4

GA4 sorts visits into default channels by source and medium, so the medium you choose decides the channel.

PresetSource and mediumGA4 default channel
Google Adsgoogle / cpcPaid Search, but read the auto-tagging note below
Facebookfacebook / paid_socialPaid Social
Instagram, LinkedIn, TikTokinstagram, linkedin or tiktok / paid_socialPaid Social, when GA4 recognises the source as a social site
Emailnewsletter / emailEmail
WhatsAppwhatsapp / messagingNo default rule matches messaging, so the source decides: a social channel if GA4 lists it as social, otherwise Unassigned
Print QRprint / qrUnassigned, because no default rule matches qr

Unassigned means no rule matched; source, medium and campaign still show in full, and you can create a custom channel group for QR and WhatsApp. One catch: GA4 reads a campaign name containing shop or shopping as Organic Shopping.

If your Google Ads account uses auto-tagging, every click carries a GCLID, a Google click identifier, and Google Ads campaign and cost data can be imported into Google Analytics. Google's help says that in GA4 auto-tagging is prioritised over manual tagging, with no option to override it.

So keep auto-tagging on, and use the builder for every other channel: social, email, WhatsApp, print, partners and creators. Use the Google Ads preset only where auto-tagging is off.

UTM naming rules for a team

  • Always set utm_source, utm_medium and utm_campaign
  • Lower case only, because GA4 treats Google and google as two values
  • Underscores instead of spaces; the builder does this for you
  • Mediums from a fixed list, such as cpc, paid_social, social, email and qr
  • Campaign names that say what and when, such as ramadan_offer or eid_al_fitr_offer
  • utm_content for each version, so creatives can be compared
  • Google Ads auto-tagging left on, so manual tags are not needed there
  • Every link added to the shared log before it is published
  • Each link opened once to check the page loads with the tags in the address
  • Short links and QR codes point to the full tagged address, never to the bare page

Who uses the UTM builder

  • Marketers

    Tag every post, email and partner link in a campaign, then compare channels in GA4 under one campaign name.

  • Advertisers

    Tell two creatives or placements on the same platform apart with utm_content, in the same GA4 report as every other channel.

  • Teams running campaigns for clients

    Agree one naming scheme with each client and share the log, so a monthly report never splits one campaign into three.

  • Restaurants and retailers

    Put a tagged link behind every table card, flyer and shop window QR code, and see which one brings visits.

  • Property brokers

    Tag the link on each brochure and site board, so visits can be traced to the listing and the printed piece.

  • Event organisers

    Give each partner, speaker and email its own utm_source, and see which one sends the most visitors to the registration page.

Worked examples

A Ramadan offer on Instagram

Suppose you run a Ramadan offer as an Instagram story ad and a feed ad. Tap Instagram, name the campaign ramadan_offer, and build two links with utm_content set to story and to feed. Both sit under Paid Social and the same campaign in GA4, and utm_content shows which ad sent more visits. Ramadan is expected to start on Monday 8 February 2027, subject to the moon sighting, so build and log the links in January.

One campaign split three ways

Suppose GA4 shows Ramadan_Offer, ramadan offer and ramadan_offer as three campaigns. Values are case sensitive, so each spelling counts on its own. Fix the links that are still running, keep the lower case version, and build new links in the builder so they match.

A QR code in a shop window

Suppose a window QR code opens your new collection page. Build the link with the Print QR preset, campaign new_collection and content window_marina, then make it a QR code on the full QR page. In channel reports it shows as Unassigned, so filter by source print and the campaign to read the visits, or create a custom channel group for QR.

What changes in 2027 for campaign tracking

Sources

  1. Google Analytics Help: URL builders: Collect campaign data with custom URLs
  2. Google Analytics Help: Default channel group
  3. Google Ads Help: About auto-tagging

Questions people ask

Is the UTM builder free?

Yes. It is free, needs no sign-up and runs in your browser, so the links you build are not sent to us or stored anywhere.

Which UTM parameters are required?

Google says you should always use utm_source, utm_medium and utm_campaign. utm_term and utm_content are optional, for paid keywords and for telling ads or placements apart.

Are UTM parameters case sensitive?

Yes. Google says parameter values are case sensitive, so utm_source=Google and utm_source=google show as two sources. Use lower case everywhere; the builder does it for you.

Should I add UTM tags to Google Ads links?

Not while auto-tagging is on. Google says GA4 prioritises auto-tagging over manual tagging, so the GCLID decides how those clicks are reported. Use UTM tags for your other channels.

What utm_medium should I use for Instagram ads?

paid_social, with utm_source=instagram. GA4 puts a social source with a medium that starts with paid into Paid Social. For unpaid posts, use social as the medium.

Why do my UTM visits show as Unassigned in GA4?

Unassigned means no channel rule matched. A medium such as qr or messaging fits none of the default rules. The source and campaign still show, and a custom channel group can give them a home.

How do I track a QR code with UTM tags?

Build the link with the Print QR preset and a campaign name, then turn that tagged link into the QR code on the full QR code generator page. Every scan that opens the page arrives with your tags.

What is the difference between utm_campaign and utm_content?

utm_campaign names the whole campaign, such as ramadan_offer. utm_content names one version inside it, such as story_video or feed_carousel, so you can compare them.

Can I use Arabic in UTM values?

The builder keeps Arabic letters, but Latin lower case is easier to type, filter and share in reports. Keep UTM values in English, even for Arabic campaigns.

Does the builder keep parameters already in my link?

Yes. It keeps any other parameters in the address you paste. UTM tags already in the link are replaced by what you type, and removed if you leave that field empty.

When you want a team on it

If you want campaigns planned, tagged and reported across every channel, our digital marketing team sets up the naming, the GA4 channels and the reports.

Growth GPS by AdEngage UAE

Send Smart Tools to your team

Re-scan after every change and watch your position move. Install it once and it opens like an app.

WhatsAppEmail

iPhone: tap Share, then Add to Home Screen. Android: tap Install when your browser offers it. Desktop: press Ctrl+D, or Cmd+D on a Mac, to bookmark.